Industrial forklifts are used in a variety of places including construction sites, shipyards, mines and drilling sites. They are invaluable in that they can unload pallets of materials, steel girders and pipes and other products from the delivery trucks and carry them to parts of the work sites that are not accessible to other vehicles. Larger, heavy-duty forklifts can also transport large containers from delivery trucks to dockside storage areas, and then to the ships. Due to the working conditions and locations, forklifts will often get extremely dirty. After washing, the wash water generated will be full of grease and oil.
Our Fork Lift (FL Series) Water Treatment Systems are heavy-duty, multi-stage reclaim and discharge systems. Depending on the usage, a certain amount of solids will be generated by the washing process. To handle the solids, our engineers will develop a site-specific solids removal system which could include sumps, trenches, screens, debris baskets and skimmers.
After many of the solids are removed in the first stage, the water will then be processed through a stainless steel clarifier oil water separator which removes most suspended solids (TSS), essentially all settleable solids and all free and dispersed non-emulsified oils from the waste stream.
After the clarifier separator, the water can either be discharged or further processed for re-use. If the water needs to be re-used, the water then goes through an extremely efficient filtration process utilizing fully automated solids filtration and a proprietary blended activated carbon (GAC) polishing filtration, and a corona discharge ozone generator to prevent odors. Processed water passing through the system will be free of particles greater than 10 microns in size, substantially all emulsified oils, waxes and other volatile organic compounds.
FL SERIES STANDARD FEATURES:
- Stainless Steel Construction
- High-Efficiency Pumps
- Corona Discharge Ozonation System
- Solids Handling & Separation
- TSS & FOG Reduction
- Multi-Stage / Multi-Pass Filtration
- Pressurized Blended Carbon Polishing Filter
- Auto-Backwashing Filters
- NEMA 4X Control Panel with PLC controller
Depending on the location, many options are available to maximize the efficiency of the wastewater treatment system including:
OPTIONAL FEATURES:
- Can be configured with existing equipment
- SCADA and remote monitoring
- UL/CSA Listing
- Transportable equipment rooms
- Rain Diverter Systems – if wash pads are uncovered
- Rain Water Harvesting Systems
- Chemical/Acid/Salinity Resistant Pumps & Components
- ORP / pH control system
FL SERIES SYSTEM SPECIFICATIONS
| MODEL | FL-10/10 | FL-30/20 | FL-60/50 | FL-100* | |
|---|---|---|---|---|---|
| FLOW RATE, GPM | 1-10 | 1-30 | 10-60 | 30-100 | |
| COALESCING PLATE AREA, SF | 41 | 124 | 211 | 400 | |
| COALESCING MEDIA, CF | 4 | 8 | 24 | 48 | |
| APPROX. CLARIFIER SEPARATOR SIZE, FT (WxLxH) | 3 x 7 x 5 | 3.5 x 8 x 6 | 4 x 10 x 6 | 5 x 11 x 7 | |
| RECLAIM RE-CIRCULATION PUMP, HP | 1.5 | 3 | 3 | 5 | |
| RECLAIM RE-PRESSURIZATION PUMP, HP | 1 | 3 | 5 | 7.5 | |
| OZONE SYSTEM | Up to 32 grams of ozone per hour | ||||
| RECLAIM CONTROL SYSTEM | PLC, Automatic, Manual or Off | ||||
| RECLAIM PUMP FRAME SIZE, FT (WxL) (TANKS ADDITIONAL) |
3 X 6 | 3 x 8 | |||
| POWER REQUIREMENTS | 208 / 240 V 1 ph or 208 / 240 / 480 V 3 ph | ||||
| * LARGER CAPACITY SYSTEMS ARE AVAILABLE | |||||
